Hawke非铠防爆格兰密封接头（501/421系列）

搜矿价格 面议

最小起订量：20 只 可售数量：500 只

手机查看详情

发货时限：: 30 天内发货

品牌：Hawke

制造商：Hawke

适用环境：其他行业

安标证号：无需办证

运费承担：卖家承担

所在地区：: 上海金山区

有效期至：: 长期有效

最后更新：: 2024-02-21 10:41

浏览次数：: 20115

HAWKE 501/421 CABLE GLANDS

HAWKE非铠防爆格兰（501/421系列）

HAWKE代理商：上海颐品自动化科技有限公司

Hawke防爆格兰代理商：上海颐品自动化科技有限公司

关键词：Hawke防爆格兰，Hawke防爆葛兰，Hawke防爆填料函，Hawke防爆密封接头

Hawke非铠防爆格兰，Hawke铠装防爆格兰，Hawke防爆变径，Hawke防爆呼吸阀堵头

Hazardous Area Cable Glands from Hawke

Hawke防爆格兰（Hawke 501/421 cable glands ）

Hawke 501/421 cable glands 适配非铠装电缆，

Hawke代理商：上海颐品自动化科技有限公司

Hawke 501/421 cable glands provide a reliable outer cable sheath seal specified to gland and terminate non-armoured elastomer and plastic insulated cables.

Hawke 501/421 cable glands are dual certified Exd and Exe and suitable for installation in Zone 1 (21) and Zone 2 (22) hazardous areas, 3.2-91.6mm outside cable diameters.

When used in increased safety applications the Hawke cable gland can be used to terminate braided cables where the braid and the cable outer sheath enter into the electrical enclosure or junction box.

♦ Exdb IIC Gb, Exeb IIC Gb, Extb IIIC, Db Non-Aromoured Cables ATEX & IECEx Cable Gland

Hawke 501/421 cable gland is suitable for cable termination and installation in Zone 1 (21), Zone 2 (22) and Division 2 hazardous areas.

Flameproof Exdb
Increased Safety Exeb
Dust Extb
Dual Certified Cable Gland For Hazardous Areas ATEX – IECEx

HAWKE 501/421 CABLE GLAND TECHNICAL SPECIFICATION

Hazardous Area Cable Gland Classification – Exdb IIC Gb, Exed IIC Gb, Extb IIIC Db
Certificate No’s – baseefa06ATEX0056X and IECEx BAS 06.0013X
Cable Gland Zone Location – Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC
Construction and Test Standards – IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7 and IEC/EN 60079-31
Ingress Protection – IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X
Deluge Protection – DTS01
Operating Temperature Range -60°C to +100°C

CABLE GLAND SELECtION TABLE FOR HAWKE 501/421

HAWKE 501/421 CABLE GLAND SELECTION TABLE
Hawke Size Ref.	Entry Thread Size			Thread Length ‘H’	Cable Acceptance Details				‘G’ Compressed Length	Hexagon Dimensions
	Entry Thread Size				Outer Sheath ‘B’					Hexagon Dimensions
	Metric	NPT *			Standard Seal		Alternative (S) Seal			Across Flats	Across Corners
	Metric	Standard	Option		Min.	Max.	Min.	Max.		Across Flats	Across Corners
2K	M16	–	–	15.0	3.2	8.0	–	–	23.5	19.0	21.2
Os	M20 ‡	½”	–	15.0	3.2	8.0	–	–	23.8	24.0	26.5
O	M20 ‡	½”	–	15.0	6.5	11.9	–	–	23.8	24.0	26.5
A	M20	¾”	½”	15.0	10.0	14.3	9.0	13.4	24.8	30.0	32.5
B	M25	1″	¾”	15.0	13.0	20.2	9.5	15.4	25.8	36.0	39.5
C	M32	1¼”	1″	15.0	19.5	26.5	15.5	21.2	28.2	46.0	50.5
C2	M40	1½”	1¼”	15.0	25.0	32.5	22.0	28.0	29.5	55.0	60.6
D	M50	2″	1½”	15.0	31.5	44.4/42.3 †	27.5	34.8	40.4	65.0	70.8
E	M63	2½”	2″	15.0	42.5	56.3/54.3 †	39.0	46.5	38.2	80.0	88.0
F	M75	3″	2½”	15.0	54.5	68.2/65.3 †	49.5	58.3	40.5	95.0	104.0
G	M80	3½”	–	20.0	67.0	73.0	–	–	41.0	106.4	115.0
H	M90	3½”	–	20.0	67.0	77.6	–	–	41.0	115.0	130.0
J	M100	4″	–	20.0	75.0	91.6	–	–	41.0	127.0	142.0

All dimensions in millimetres (except*).
Os – F size metric entry threads are 1.5mm pitch as standard. For G size Cable Glands and above, a 2mm pitch is supplied as standard (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering.
† Smaller value is applicable when selecting reduced NPT entry option.
Sizes Os and O are available with an M16 thread size. For O size with an M16 thread, the maximum cable inner sheath diameter is 10.9mm.

CABLE GLAND MATERIAL & FINISH

Hawke 501/421 cable glands are manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.

PREPARING CABLE & GLAND FOR INSTALLING HAWKE 501/421

CABLE PREPARATION

Allow sufficient length of cable, measurement II, to suit the electrical equipment. If required, install cable gland shroud. Pass cable through the cable gland as shown. If the equipment has a threaded entry, Hawke recommend screwing the cable gland into the equipment to prevent cable twisting after Step B.

CABLE GLAND PREPARATION

Unless already screwed into the electrical equipment, hold the entry (2) in position with a cable gland spanner/wrench to prevent cable rotation and tighten the backnut (1) until resistance is felt between the cable and seal. Then proceed to turn the back nut through a further half to one full turn to complete the inner seal. Locate the shroud over the cable gland where required. To ease wiring inside the equipment strip the cable outer sheath of the cable as shown.

Click Hawke Cable Glands to view the complete range of hazardous area glands certified according to ATEX & IECEx for Zone 1 / Zone 2.

Flameproof Exdb and Increased Safety Exeb (Dust Extb) Dual Certified glands from Hawke include – for further information review the product pages or contact us to discuss your cable gland requirements.

501/421 Cable Gland Unarmoured – outer cable sheath cable sealing
501/423 Cable Gland Unarmoured – flameproof seal to inner/outer cable sheath with IP seal on the outer sheath
501/453 Universal Cable Gland Wire Armoured Baided Steel Tape Armoured – indoor/outdoor hazardous areas
ICG 623 Barrier Gland Unarmoured – Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC hazardous areas
ICG 653 Barrier Gland Armoured – Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC hazardous areas

Hawke防爆格兰（Hawke Cable Gland）

Hazardous Area Cable Glands-ATEX IECEX，Exe，Exd Group II

Hawke防爆格兰代理商：上海颐品自动化科技有限公司

关键词：Hawke防爆格兰，Hawke防爆变径，Hawke防爆堵头，

Hawke防爆呼吸阀，Hawke防爆接线盒，Hawke防爆控制箱

Hawke防爆格兰等产品规格书及相关证书-请咨询上海颐品自动化科技有限公司

免责声明

本网页所展示的有关【Hawke非铠防爆格兰密封接头（501/421系列）】的信息/图片/参数等由的会员【上海颐品自动化科技有限公司】提供，由搜矿网会员【上海颐品自动化科技有限公司】自行对信息/图片/参数等的真实性、准确性和合法性负责，本平台（本网站）仅提供展示服务，请谨慎交易，因交易而产生的法律关系及法律纠纷由您自行协商解决，本平台（本网站）对此不承担任何责任。您在本网页可以浏览【Hawke非铠防爆格兰密封接头（501/421系列）】有关的信息/图片/价格等及提供【Hawke非铠防爆格兰密封接头（501/421系列）】的商家公司简介、联系方式等信息。

在您的合法权益受到侵害时，请您致电186-1288-9692，我们将竭诚为您服务，感谢您对搜矿网的关注与支持！